Focus Mk2 ST225 2005 to 2010 Brake Package

Discs

1 pair of MTEC front drilled and grooved discs: Diameter: 320.0 Thickness: 25.0 Minimum Thickness: 23.0 Height: 48.5 Bore Diameter: 63.5 Studs: 5 Location Studs: 0

1 pair of MTEC drilled and grooved rear discs: Diameter: 280.0 Thickness: 11.0 Minimum Thickness: 9.0 Height: 41.0 Bore Diameter: 63.5 Studs: 5 Location Studs: 0

Pads

1 set of MTECPAD4030 MTEC front brake pads

1 set of MTECPAD4031 MTEC rear brake pads

Braided brake hoses

Kits feature the finest quality hose consisting of a PTFE inner with a stainless steel outer braid. This eliminates the spongy feel under arduous conditions giving greater braking efficiency or clutch operation as well as providing superior resistance to abrasion and corrosion. These kits therefore not only provide the reliability and safety demanded but offer brilliant good looks that improve the appearance of any installation.

• 100% Pressure tested. Guaranteed to be leak free and give an improved braking performance.
• 100% TUV DOT ADR and ISO approved. MTEC brake lines can be used worldwide.
• Manufactured in the UK. All fittings are designed and manufactured to fit every application first time so no bending of banjos is required or universal fittings that do not fit properly.

Mtec Brakes High Performance Brake And Clutch Fluid Dot 5.1 500ml

High performance Dot 5.1 brake and clutch fluid for road, track and race MTEC DOT 5.1 is a very high specification Brake and Clutch Fluid recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based fluid of this type is specified. Well suited to High performance vehicles and or vehicles fitted with ESP / ASR systems. Conforms to and exceeds the current international specifications U.S. FMVSS No.116 DOT 5.1, DOT 4 & DOT 3, SAE J1703 & J1704 and ISO 4925 (Classes 3 & 4 and 5.1). Mixes safely with other brake and clutch fluids conforming to the above specifications Typical Dry Boiling Point 269°C. Typical Wet Boiling Point 184°C.

Mtec Brakes CG29 Copper Grease 100ml

MTEC Brakes CG29 Copper Grease helps prevent brake squeal and protects metal against corrosion. It contains elements that inhibit oxidation and corrosion of metal parts, it will also protect against seizure of metal parts. MTEC Brakes CG29 Copper Grease should be used between the brake pad backing plates and caliper piston heads and contact points. Do not apply to friction material surfaces such as brake pads and discs.

*Images are of generic items and for illustration purposes only.