Focus Mk2 ST225 2005 to 2010 AP Racing big brake package (Red Calipers)

Model Year: 2005 on

Brake Caliper: Type CP6628

Brake Disc: Grooved CP4914-940/1CG8, Ø343 x 28mm / 48 Vane

Brake Pads: CP6627D50-DS2500

Wheel: 18" Aftermarket

IMPORTANT NOTES:

1. This kit will not fit under standard 17" rims.
2. Before purchasing or installing a formula big brake kit, make sure that the brake upgrade is suitable for the make and model of the vehicle, and that the wheel has been checked for clearance by downloading the caliper profile drawing PDF using this link.

About AP Racing Formula Big Brake Kits (Performance Road)

AP Racing Formula Brake Upgrade Kits have been designed for everyday road use and weekend track use. They will reduce braking effort and give more responsive late braking confidence when used on the track.

They also resist fade after repeated high speed stops, but are still able to cope with day to day motoring.

Kit Contents

Calipers

All Performance Road Brake Calipers use conventional seals in conjunction with a dirt seal and are finished with a black PTFE based paint coating which is impervious to normal brake fluids & high brake temperatures, with the AP Racing logo highlighted in yellow, or gloss red with the logo highlighted in white.

Mounting Brackets

All brackets are individually designed for each application in either hard anodised aluminium or steel.

Mounting Bells

The bells are lightweight aluminium alloy, and hard anodised for durability. Each mounting bell is specifically designed for the application.

Brake Discs

The discs used in the AP Racing brake kits have been selected from our extensive race proven range which are synonymous with performance & quality throughout the racing world.

Brake Pads

Almost all AP Racing brake kits come complete with our own APF404 pads. These are ideally suited for all round performance road use. We can advise on, or specify and supply alternative pads specifically for track days.

Brake Hose

Goodridge TUV approved steel braided hoses with nylon armour protection are supplied with each kit.

IMPORTANT NOTE - ROAD APPROVAL FOR BRAKE HOSES:

In order to meet the requirements of the TUV, the FMVSS106, SVA and SAE 1401 standards for brake lines for road going vehicles, all fittings must be permanently attached to the hose.

RE-USABLE OR THREADED ATTACHED FITTINGS MAY NOT BE USED. ALL FITTINGS MUST BE CRIMPED OR SWAGED TO THE HOSE WHETHER THE HOSE IS RUBBER OR BRAIDED STEEL.

All Goodridge factory manufactured brake line kits are crimped and meet the requirements of the DOT and SAE. For full TUV approval, lines must pass a series of tests and be assembled in an approved assembly unit that meets all the requirements of the TUV office, including traceability. Consult the braided steel brake line experts 'Goodridge', if you are in any doubt on +441392369090.

Fixings

Each kit contains a comprehensive installation guide and list of tightening torques. All mounting bolts & nuts are of high tensile steel and come with a sachet of Loctite 262. Shim washers are supplied in each kit to allow accurate positioning of the caliper on the brake disc, and allow for tolerance variations in different hubs/uprights.

Brake Fluid

All kits have 2 bottles of AP Racing Formula Dot 5.1 Brake & Clutch Fluid included.

*Images are of generic items and for illustration purposes only.