Street Blaster 150i2/2 Nitrous Kit for most engines with 2 throttle bodies
Delivery time: 7 -10 working day(s) unless stated otherwise in the listing. Shipping to Northern Ireland, Highlands & Islands of Scotland, Isle of Man & Isles of Scilly carries a surcharge so contact us before purchasing for a bespoke price.
| Quantity | Add to Basket |
Wizards of NoS (WON) has specifically created the Street-Blaster 150i2/2 for engines with 2 throttle bodies that are more than 12” apart, which is most V configuration engines. This twin pair Pulsoid system delivers exceptional results, without the potential risks associated with using the standard system with only a single pair of Pulsoids - the Street-Blaster 150i2, and at a lower cost than the direct port alternative. Whilst the standard Street-Blaster 150i2 is suitable for most engines with 2 throttle bodies, the extra pair of Pulsoids in the Street-Blaster 150i2 Twin Pair Pulsoids ensure that;
- There is no delay in power delivery.
- There is no risk of a backfire due to excessively long outlet pipes.
Click here for a comparison of WON vs other brands.
If you want a simple to fit, well priced system that delivers maximum reliability and power; the Street-Blaster 150i2/2 has been developed by WON with you in mind. Whether it’s purely for an adrenaline fuelled thrill or the more serious use of gaining a competitive edge, the Street-Blaster 150i2/2 can deliver a boost of up to 150bhp, whenever you need a burst of acceleration. Utilising the same high-quality components as our ultimate race, Pro-Series systems the Street-Blaster 150i2/2 offers peace of mind and impressive results at a very competitive price.
To realise the the full potential capability of the system we only supply these kits with the upgraded braided hose.
Features:
- Lifetime guarantee.
- Crossfire injectors.
- 2 Pairs of Billet alloy Pulsoids.
- Micro bore nylon hose for maximum efficiency.
- EU specification nitrous bottle with FlowMax valve & SPRV.
- Laserlite QD nitrous bottle mounting system
This nitrous kit is suitable for (but not limited to) the following:
- Nissan V6 Injected Engines (300ZX , 350Z etc.)
- Ford V6 injected Engines ( Cortina, Granada etc.)
- Vauxhall V6 Injected Engines ( Calibra, Vectra )
- VW V6 Injected Engines (VR6) ( Golf etc)
- Audi V6 & V10 Injected Engines (A4 , RS4, R8 etc.)
- Mercedes V6 Injected Engines ( C-class , E-class etc.)
- Jaguar Injected V12 Engines (XJS etc)
- Lamborghini's V10 enjnes (Gallardo, Huracan, Audi R8)
Please note that whilst the picture shown on this page may not be an exact representation of the system's contents, the parts list below is.
Parts Included:
- 2 x Crossfire Injector (spacer & retainer).
- 2prs x Billet alloy Pulsoids with CNC machined SS fittings and laser cut mounting plates.
- 1 x 11lb Bottle w/ maxflow valve (bottle shipped empty).
- 1 x Laserlite polished stainless steel QD bottle mounting system.
- 2 x 5mm ‘Y’ pieces
- 1 x Fuel adapter - 4 way block with 5mm & barb O/L's.
- 1 x Throttle activated micro switch & bracket (electronic TPS upgrade available for an additional charge).
- 1 x Arming switch w/ aircraft style cover.
- 1 x Electrical connectors & wire pack.
- 9M of 4AN braided high pressure nitrous supply pipe.
- 4M of 5mm nylon fuel supply pipe.
- 2M of 4mm nylon supply lines from Pulsoids to injector.
- 10 x 4mm retaining nuts and olives for nylon lines.
- 15 x 5mm retaining nuts and olives for nylon lines.
- 1pr x Metering Jets (suitable for your application)
- 4 x stickers
- Fitting instructions & stickers
*Bottle shipped empty
Lead time on these kits is 6-8 weeks. Fitting takes place at our fitting centre in Swansea where the car will need to be left for 2 working days.
Wizards of NOS Lifetime Warranty
Most products 'manufactured' by WON are covered by a warranty against any 'manufacturing' defects for the lifetime of the original purchaser. This warranty does not cover damage caused by any unapproved dismantling or modifications by the customer, nor does it extend to deterioration due to ‘normal’ ageing and use. The warranty only applies to the original purchaser and is not transferable to subsequent owners of the products.
This warranty does not apply to products that are not 'manufactured’ by WON and such products are only covered by the statutory laws applicable at the time or the original manufacturers warranty, whichever is the longer. We will be posting a full list of all our products and the appropriate ‘specific’ warranty information as soon as possible but until then, please call for details if you need more information on a particular product. If any part becomes faulty, before even considering the return of the product, it is advisable to phone & speak to one of our technicians, as most problems can be easily resolved that way.
If it is decided that a product needs to be returned to us for inspection, it will need to be sent with proof of purchase, along with full contact details and payment for return postage, with a brief description of the fault. Based on the results of the inspection, WON will either repair or replace the product if the fault is found to be a manufacturing fault. If the cause of the fault is found to be outside our warranty terms and conditions, we will offer to repair or replace it at the customer's expense.
Highpower Systems (WON) does not accept responsibility or liability for any loss as a consequence of either the systems function or malfunction.